Dear People,
I am trying to run the Segger SystemView with the FreeRTOS and STM32F4 Discovery Board. But I am encountering the problem in doing so.
I followed these steps:
1 -- First copied the Config and SEGGER folder completely to the project folder and added it into the source code project in the Keil as can be seen in the screenshot.
2 -- Then I copied the SEGGER_SYSVIEW_Config_FreeRTOS.c and os_cfg_trace.h from the Sample/config to the source code folder and SEGGER_SYSVIEW_FreeRTOS.c and SEGGER_SYSVIEW_FreeRTOS.h and os_trace_events.h to the source folder from the sample/OS folder.
3 -- Then I added the #include in the main.c file and in the main function.
Now compiled the code and put it into the controller and than started the SystemView but nothing is happening and I am getting the error.
Please help me in successfully integrating the Systemview.
regards
Piyush Pandey
I am trying to run the Segger SystemView with the FreeRTOS and STM32F4 Discovery Board. But I am encountering the problem in doing so.
I followed these steps:
1 -- First copied the Config and SEGGER folder completely to the project folder and added it into the source code project in the Keil as can be seen in the screenshot.
2 -- Then I copied the SEGGER_SYSVIEW_Config_FreeRTOS.c and os_cfg_trace.h from the Sample/config to the source code folder and SEGGER_SYSVIEW_FreeRTOS.c and SEGGER_SYSVIEW_FreeRTOS.h and os_trace_events.h to the source folder from the sample/OS folder.
3 -- Then I added the #include in the main.c file and in the main function.
Now compiled the code and put it into the controller and than started the SystemView but nothing is happening and I am getting the error.
Please help me in successfully integrating the Systemview.
regards
Piyush Pandey