[ABANDONED] No values displayed in EmbSys debug pane

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] No values displayed in EmbSys debug pane

    Freescale K64F, KDS 3.2, FreeRTOS-aware debugging on Windows 8.1, JLink_Windows_V612a:
    No values are displayed for the peripheral registers (see attached image).
    Any idea what is going on?
    Thanks!
    Best Regards, Dave

  • Hi Dave,


    I can't really tell from here if this a J-Link related issue or a KDS related issue.
    If debugging works in general (stepping, breakpoints, etc.), my first guess would be that this issue is related to the KDS IDE.

    If you would like to do so, you could give J-Link Commander or Ozone a try in order to verify that everything works fine when using the SEGGER tools.
    Please do not hesitate to ask me if you have any further questions regarding Ozone or other SEGGER tools.

    Best regards,
    Niklas
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.