Hi,

I'm using an STM32F415. I am not using SES to build only to to debug an externally generated .elf file.

There is this from the manual:

The Registers window shows the set of register groups defined in the memory-map file the application was built with. If there is no memory-map file associated with a project, the Registers window will show only the CPU registers.



This described what I am seeing but where do I find a memory-map file and how do I associated with my project? I did tell the project which processor I am using so I was surprised that it did not know about the registers.


Thanks,


Kenny

I found it.

Properties->Debugger->Debugger Options->Register Definition File to .svd file (I downloaded mine from the ARM website).

Properties->Debugger->Debugger Options->Register Definition File Type->SVD