USB CDC communication gives stall packet in PC side randomly

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • USB CDC communication gives stall packet in PC side randomly

    HI,

    We are using the Segger emUSB CDC with embOS in our product, with LPC2478. on continuous use of the system we are seeing sometimes the PC side gets in packet stall and the communication stops. If you have seen these issue can you let us know what can be probable cause of this issue. We are using the blocking call of USB_CDC_Write to transfer the data. the System side keeps on running.and in order to restore the communication we had to disconnect and connect back again.

    Any input will be welcomed...

    Regards
    :love: Satya
  • Hello Satya,

    Does the device side send the stall to the PC side?
    Which endpoints is stalled?
    Do you have a USB analyzer log?
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.