Hi,

We are starting the development on a new SOC from Silicon Labs, that's the EFR32FG1P132F256. We use a Dev Kit from Silicon Labs which includes an embedded SEGGER J-Link. With the Simplicity Studio from Silicon Labs everything works as it should (compile, load, debug). However, we want to use our own Eclipse/gcc based development tools but we don't know what type of device should we tell J-Link we use, as the EFR32FG1P132F256 is not in the supported devices list. Any idea?

Thanks in advance,

Lix

Hi Arne,

Thanks a lot for the quick answer! Using your suggestion, now it works! And thanks for the tip on the current list of supported processors.

Best regards,

Lix