[ANSWERED] J-FLASH SPI; only progressbar visable?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ANSWERED] J-FLASH SPI; only progressbar visable?

    We are using J-FLASH SPI via LabView to programm our targets.
    With the -min switch we can hide/minimize the GUI of J-FLASH. (So the tester doesn't see to much information on the screen)
    Unfortunatly the progressbar is invisable in this case...
    Is there a possibility to run J-FLASH with the GUI minimized, and only the progessbar popup is visable?
    I found a section "GUI-Mode = 0" in the *.proj file, is this the way to go?

  • Hi Chris,

    Is there a possibility to run J-FLASH with the GUI minimized, and only the progessbar popup is visable?
    Currently not and there are no plans to add such a functionality because in general customers want either to work with GUI or without GUI but not with a mix of both where only certain GUI elements are shown while others are not.

    For such custom requirements, we would recommend our J-Link SDK which allows to integrate J-Link into custom applications (e.g. programming application) and allows fully customization. Using the J-Link SDK, you can specify on your own if the programming progress bar is shown or not. Further information can be found on our webpage: segger.com/jlink-sdk.html


    Best regards
    Erik
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.