Using the pre-compiled simulator library

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Using the pre-compiled simulator library

    Our pro version of emWin does not include the simulator library source.
    This is not a problem as such but it appears that the resolution is fixed.
    Am I correct?
    If so can we obtain a library with a different resolution to suit the (480 x 272) LCD we are using?
    Thanks
  • The size display size of the simulation is not fixed. I assume you are working with the wrong project (Trial\SimulationTrial.dsw), which uses a precompiled library of emWin. The project Start\Simulation.dsw must be used instead. It includes the source code of emWin and configuration changes take effect.

    Jörg
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.