JLINK ARM v3.90 API error

yogesh · Aug 18th 2008, 11:00pm

hi

Hi,

I was using JLINK RDI 3.84 with IAR 5.20 and didn't encounter this new error. After upgrading to JLINK RDI 3.90 I am getting this new error.

Message box popup (on flashing - NXP 2368) heading -- JLINK ARM v3.90 API error
message box content -- UTIL_CopyAPIStruct: Illegal size of struct

If some one has encountered this error or might know a solution, I would appreciate hearing about it.

regards,
Yogesh

SEGGER - Rolf · Aug 22nd 2008, 8:26pm

Yogesh,

we have added additional checks in the latest software which probably cause this error message to show up.
We would like to investigate this;
Could you send an email to support@segger.com with info (ideally a project) that allows us to reproduce
and investigate this ?

Thanks,
Rolf

yogesh · Aug 25th 2008, 9:19pm

Hi,

Here is a project that I had modified from the sample from IAR --- ARM\NXP\LPC23xx\IAR-LPC-2378-SK\simple\timer

You can use this with an ARM evaluation board - Kiel LPC 2360 based eval (MCB 2360UME). Please note: attachment is a zip file (you can rename it to timer_zip.zip and open with unzip).

Let me know, if you need anything else.

thanks for your help.

-Yogesh
Timer_zip.jpg

SEGGER - Alex · Aug 26th 2008, 10:23am

Hello yogesh,

the problem is fixed in the latest J-Link software version (V3.90c).
Can you please download the new version and confirm that it solves the problem?

The latest software version can alway be downloaded from our website:
segger.com/download_jlink.html

Best regards,

Alex

yogesh · Aug 28th 2008, 8:41pm

Thanks,

v 3.90c fixes this problem.

-Yogesh

Share