reset strategy?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • reset strategy?

    when I read the j_link RDI User Guide, find reset strategy. some reset strategies tell me the hardware reset pin is used to reset the CPU.
    On my board , I don't connect the CPU's reset pin to JTAG connector,how the j-link reset the CPU?
    I use the lpc2210 ,on my board I connect TRST TDI TMS TCK RTCK TDO to JTAG connector.
  • Hello eyuge2,

    without the reset pin being connected to the JTAG connector, none of the hardware
    reset strategies will work because the J-Link can not pull the reset pin to "low".

    Best regards,
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.