Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

9 6,853

andrewsglenn

Triggering a functional reset on a NXP S32K344 through JLink Commander

0 537

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,354

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,574

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,976

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,597

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,326

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,174

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,075

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,690

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,157

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,771

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,464

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,868

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 7,006

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,481

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,251

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,809

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,723

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 8,015

SEGGER - Nino