Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

7 719

SEGGER - AlexD

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,317

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,525

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,946

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,574

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,309

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,135

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,016

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,655

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,114

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,739

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,420

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,830

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,960

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,426

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,216

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,767

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,685

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,983

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,726

SEGGER - Nino