Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

0 148

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,292

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,472

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,921

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,565

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,257

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,068

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,968

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,629

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,002

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,718

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,395

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,806

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,925

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,386

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,192

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,720

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,610

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,965

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,708

SEGGER - Nino