Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

8 2,658

SEGGER - Simon

Triggering a functional reset on a NXP S32K344 through JLink Commander

0 30

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,335

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,549

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,957

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,585

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,317

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,152

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,047

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,676

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,139

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,761

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,443

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,850

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,988

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,457

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,235

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,785

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,706

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 8,001

SEGGER - Nino