Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

0 189

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,303

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,503

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,934

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,571

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,267

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,082

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,981

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,640

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,059

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,727

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,403

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,822

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,942

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,407

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,200

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,739

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,640

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,976

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,721

SEGGER - Nino