Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,187

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,203

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,841

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,486

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,105

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 7,814

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,806

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,486

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 3,268

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,616

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,272

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,692

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,749

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,112

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,045

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,478

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,399

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,798

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,586

SEGGER - Nino

[SOLVED] Change Flash Start Address Code and Startup

4 16,991

SEGGER - Nino