Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

7 1,147

SEGGER - AlexD

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,321

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,527

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,948

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,574

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,310

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,137

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,024

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,660

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,114

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,743

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,428

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,833

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,965

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,427

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,217

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,772

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,691

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,985

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,733

SEGGER - Nino