Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

8 2,780

SEGGER - Simon

Triggering a functional reset on a NXP S32K344 through JLink Commander

0 53

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,337

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,552

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,959

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,586

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,318

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,152

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,047

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,677

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,140

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,764

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,444

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,851

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,991

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,458

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,238

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,787

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,709

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 8,001

SEGGER - Nino