Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

Triggering a functional reset on a NXP S32K344 through JLink Commander

1 11,016

SEGGER - Simon

JLinkGDBServerCL connects, Ozone does not

9 23,391

andrewsglenn

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 5,130

illy777

[SOLVED] J link edu mini cannot connect to target

1 4,542

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 4,905

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 2,096

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,933

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 9,587

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 8,950

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 5,270

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 5,348

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 7,639

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 8,247

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 8,661

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 8,131

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 13,762

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 7,000

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 11,824

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 13,351

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 9,893

SEGGER - Nino