Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

0 11

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,280

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,460

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,921

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,564

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,256

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,061

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,963

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,628

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 3,972

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,717

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,393

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,797

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,922

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,381

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,186

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,712

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,606

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,962

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,707

SEGGER - Nino