Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

6 312

andrewsglenn

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,313

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,521

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,941

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,573

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,299

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,118

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,008

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,653

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,100

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,736

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,416

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,829

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,956

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,423

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,209

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,765

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,665

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,981

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,726

SEGGER - Nino