Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

8 3,954

SEGGER - Simon

Triggering a functional reset on a NXP S32K344 through JLink Commander

0 198

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,338

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,559

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,963

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,587

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,318

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,158

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,053

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,682

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,141

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,767

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,448

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,855

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,994

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,464

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,241

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,790

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,715

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 8,005

SEGGER - Nino