Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

0 180

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,300

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,493

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,928

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,568

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,264

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,076

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,980

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,635

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,042

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,723

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,401

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,816

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,940

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,399

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,198

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,733

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,631

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,971

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,717

SEGGER - Nino