Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

7 1,663

SEGGER - AlexD

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,330

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,536

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,953

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,577

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,313

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,143

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,033

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,670

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,128

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,750

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,436

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,839

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,974

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,435

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,222

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,776

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,693

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,992

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,734

SEGGER - Nino