Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

7 2,332

SEGGER - AlexD

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,334

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,543

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,957

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,580

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,317

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,149

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,042

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,675

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,139

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,756

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,443

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,843

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,986

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,450

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,229

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,784

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,703

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,999

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,738

SEGGER - Nino