Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

1 229

SEGGER - AlexD

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,307

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,507

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,936

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,571

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,270

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,093

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,994

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,643

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,083

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,728

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,407

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,824

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,948

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,413

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,203

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,756

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,648

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,977

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,722

SEGGER - Nino