Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

0 150

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,293

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,478

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,922

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,565

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,259

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,070

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,970

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,629

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,010

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,719

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,398

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,808

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,926

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,390

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,193

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,723

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,611

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,966

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,711

SEGGER - Nino