Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

0 118

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,287

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,466

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,921

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,564

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,257

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,065

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,966

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,629

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 3,987

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,718

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,393

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,803

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,924

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,385

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,190

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,717

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,609

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,964

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,707

SEGGER - Nino