Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

7 1,423

SEGGER - AlexD

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,325

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,533

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,949

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,576

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,312

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,140

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,031

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,668

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,122

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,746

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,431

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,834

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,967

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,429

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,219

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,773

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,692

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,989

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,733

SEGGER - Nino