Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

0 185

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,301

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,498

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,932

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,570

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,267

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,082

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,981

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,636

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,050

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,725

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,402

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,816

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,940

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,405

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,199

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,736

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,636

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,975

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,717

SEGGER - Nino