Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

JLinkGDBServerCL connects, Ozone does not

5 281

SEGGER - AlexD

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,313

illy777

[SOLVED] J link edu mini cannot connect to target

1 3,520

SEGGER - Fabian

[ABANDONED] Debugging with JLinkGDBserver - How is the erase size determined

1 2,939

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,573

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,293

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 8,112

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 6,004

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,649

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 4,097

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,733

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,416

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,828

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,953

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,421

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,209

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,763

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,659

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,981

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,726

SEGGER - Nino