Threads Tagged with “NXP”

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

Threads

Topic Replies Views Last Reply

[SOLVED] Issue with debugging the IMX8L6/L8-M7-Cortex from NXP with VS-Code

1 3,171

illy777

J link edu mini cannot connect to target

1 3,168

SEGGER - Fabian

Debugging with JLinkGDBserver - How is the erase size determined

1 2,827

DavidW

[ABANDONED] S32K324 Jlink multicore support with S32DS3.4.3

0 1,472

[SOLVED] LPC546xx: write Flash by page, not by sector

1 3,098

SEGGER - Fabian

[SOLVED] Support for JTAG Access to NXP S32G2xxx Cortex M7 Cores

3 7,770

SEGGER - Fabian

[SOLVED] Flasher ARM Fails with NXP K81

1 5,793

DenisCollis

Bitmap Converter NXP: Command line -exit does not work properly

4 4,471

ljeanmaire

[SOLVED] Difficulty Programming LPC2478 MCU with JLink.exe

2 3,249

SEGGER - Nino

[SOLVED] Cortex A-53 and J-Link and J-Flash

1 6,599

SEGGER - Fabian

[SOLVED] The selected device -IF is unknown to this selection

2 6,261

SEGGER - Fabian

[SOLVED] JLink RT-1052 64MB of QSPI Flash

1 5,674

SEGGER - Fabian

[ABANDONED] Jlink edu mini - initTarget(): code returned with error code -1

5 6,742

SEGGER - Fabian

[SOLVED] Stack pointer is setup to incorrect alignment

3 12,090

SEGGER - Nino

[SOLVED] Difficulty implementing Open Flashloader per wiki instructions

1 6,042

SEGGER - Erik

[SOLVED] Error: Timeout while erasing sector, core does not stop. NXP K81 QSPI

1 9,460

SEGGER - Nino

[SOLVED] loadbin to QSPI Flash on NXP K81 fails

5 11,376

SEGGER - Nino

[SOLVED] Unable to flash QSPI flash connected to IMXRT1052

1 7,790

SEGGER - Nino

[SOLVED] writing i.MX RT1051 eFuses through J-Link

3 5,572

SEGGER - Nino

[SOLVED] Change Flash Start Address Code and Startup

4 16,936

SEGGER - Nino