Search Results

Search results 1-11 of 11.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    Quote from icwiener: “@Zeke: thanks for the command. ... Just curious though. What version are you running? ” Haha! I'm running V3.20b still. I'll upgrade and get back to you. Timeline shouldn't be an issue since I don't use that.

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    Just another day at work... forum.segger.com/index.php/Att…1b8ef9ce803e81f723761986c Closing Ozone via task manager is taking too much time so I use cmd instead. Seriously I can reproduce this all day and on several machines (with varying error rates, my main PC being the worst). Ask me anything! I'm seriously suspecting the severity varies based on the exact j-link hardware used. We have a J-trace at the office that I don't think I've seen it on. Meanwhile the j-link on-board that I use at home…

  • I also have this issue. It's been an issue in Ozone for a long time and incredibly easy to reproduce. It occurs when the non-maximised window is small enough to push the panels in Ozone. Reproduction steps: Open ozone Make sure it's not maximised, but make it large enough that it can be smaller Make sure the panels are not at their minimum size (expand them) Resize the whole ozone window as small as possible Resize Ozone to be the same size as initially Observe that all the panels have been push…

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    More logs. I think these should be clearer since I barely did anything to Ozone before hitting the bug.

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    Finally I got some logs small enough to upload with a complete jlink log. Hope this helps!

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    Quote from SEGGER - Nino: “Hello, Quote from Zeke: “Here are some logs. These are from after I closed Ozone via task manager. ” Thank you for providing the logs. The J-Link log does not seem to be saved correctly. Is Ozone the only tool in this instance that is connected to your J-Link or are there also other tools?You write that this issue appears on your own eval boards. I believe we should have them in our office as they are using J-Link OBs. Could you provide an example project for your boar…

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    Here are some logs. These are from after I closed Ozone via task manager.

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    Yes, I can do that. I can also confirm this bug is not related to editing variables in the watched data view. My encounter today went like this: Open Ozone New project (specify .elf, SWD @ 4MHz) Save project file Connect to jlink Run Do things in other programs... Come back to ozone Try to set breakpoint (nothing happened) Try to pause CPU (nothing happened)

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    Hi. I've answered a few of those already but I'll summarise here. Could you provide us with reproduction steps that work reliably? Unfortunately it's rather random. My colleague gets this bug every other day, but I was once triggering it every 10 minutes. It MAY be related to editing variables in the watched data list. All of my recent experiences of the bug have been the same sessions where I was doing this. What is your debug setup? Cortex-M0 core with a custom ASIC being debugged by an on-boa…

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    Can confirm this is still a bug in 3.20b. Just occurred on the same setup after re-compiling the binary and going back to ozone. Ozone asked me if I wanted to load the new binary and I pressed yes. The dialog closed and nothing happened (there is no flashing dialog). Status bar says "Resetting device...". FYI I'm on Windows 10 Pro on a desktop. Here's another thread on the same issue: forum.segger.com/index.php/Thr…ost-connection-to-target/

  • Ozone stuck on "resetting device"

    Zeke - - Ozone related

    Post

    This is basically a re-post of forum.segger.com/index.php/Thr…ne-hangs-in-device-reset/ I was having this issue in 3.20a. It would trigger after only a few minutes of connection to the device. I've updated to 3.20b and the issue appears fixed (after about 30 minutes of use), but I don't see anything that would fix this in the release notes. The bug was triggered seemingly at random. After this, none of the interaction with the device would work. Resetting, halting, disconnection, editing/viewing…