I think I've found the solution. I've added a ProgramSection as follows: XML Source Code (1 line)This seems to correctly fill the whole area between NRFFW and REGOUT0. Kind regards, Remco Poelstra
Hi Nino, Thanks for your answer. I'm very sorry for my late reply, I was waiting for a mail from the system that there was a reply but never received it. I've tried both setting the 'default fill pattern' to 0xff as well as adding a 'fill="0xff"' attribute to the MemorySegment in the flash_placement.xml, but the UICR section is still filled with all 0's. Did I set the wrong option?
Hi, I'm using SES 4.52b with a (custom) nR52840 board. SES generates both .elf and .hex files. I've defined the following MemorySegment in the flash_placement.xml: XML Source Code (5 lines)When I now start the debugger (which loads the .elf) the unused sections in this MemorySegment are filled with 0's. When I load the .hex file, the unused sections are properly filled with 0xff. Is this a bug in the .elf loader? Or is there a way to make sure the unused sections remain untouched while loading a…