Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello Jules, We receiver your ticket, however unfortunately the mail provider you used for registering is blocking our e-mail responses. So I will answer you here instead. Basically your question has already been answered in this thead: [SOLVED] TMS470R1VF Best regards, Nino

  • Hello Thomas, Would it be possible for you to provide us with the project for reproduction purposes so we can investigate this further? Best regards, Nino

  • Hello Harjit, Thank you for your inquiry. Could you check your settings under Tool->Options->Building->Parallel Project Building This setting should be set to No. Best regards, Nino

  • Hello, Thank you for your inquiry. Nordic has a partnership with SEGGER so the latest SDK version 15.2.0 will also have Embedded Studio projects that work out-of-the-box. Could you give that SDK a try and see if the behaviour improves? Quote from secondbest: “What is the problem of the segger embedded studio and how can I get the code to automatically run without press reset button? ” Sounds like your application requires some bootloader or similar to be run before executing the application. Is …

  • Hello, Thank you for your inquiry. Quote from Kenny: “Why then are these still generated? ” Short answer: Legacy support so new setups work with old setups in theory. Quote from Kenny: “Is there an option to specify a path to this file or to suppress them? ” Currently not as they are mostly not used by software anymore and a JLinkScript file would have priority over the settings file. Best regards, Nino

  • Hello, Does the same issue appear with the V2.56w? We found some instabilities with the new V2.60e version and want to make sure this issue is not also related. Best regards, Nino

  • Hello Maoyang, Thank you for your inquiry. The attached JLinkScript comes directly from Spansion/Cypress and is rather outdated. The _int64 variables are no longer supported. You would need to write helper functions to use U32 instead. Best regards, Nino

  • Hello, We received your inquiry per e-mail as well. Please try to use only one communications channel so no information gets lost between them. Best regards, Nino

  • Hello Akul, Thank you for your inquiry. In your usecase the J-Link SDK would be best fitting: segger.com/products/debug-prob…nk/technology/j-link-sdk/ With the SDK you can write your own application initializing all J-Link features e.g. RTT. Best regards, Nino

  • Hello, We received your request in our ticket system as well. Please only use one channel of communication to make sure that no information is lost between them. Best regards, Nino

  • Hello, Thank you for your inquiry. Quote from dlip: “Is there something I can do to get the mini to work with longer cables? ” Unfortunately there is no easy tip that will make any cables work as the cable quality even from the same cable vendor and same batch can have severe quality fluctuations in their signal quality. So we suggest to stick with the cable that is shipped with our devices as they are tested each before delivery. Any third party cables are not guaranteed to work. Best regards, …

  • JLink icon spam

    SEGGER - Nino - - J-Link/Flasher related

    Post

    Hello, Thank you for your inquiry. We are aware of this. However it only appears if the J-Link DLL is not terminated correctly through the application (in this case pylink). It is a little Windows quirk where Windows is not very friendly in the task bar to applications that have been terminated out of order. Make sure to terminate your program correctly each time then this should not happen. Best regards, Nino

  • Hello, Thank you for your inquiry. Such an issue is not known to us. Does a general connect with JTAG work? Could you post an excerpt from your debug interface schematic that shows how the JTAG signals are wired? Could you measure the signals with an oscilloscope and see if the expected voltage levels are expected? Best regards, Nino

  • Hello, Thank you for your inquiry. Quote from serina.dsouza: “now how to append file 1 and file 2 as said in the document . ” You can either append it by first reading both parts of the buffer, append it in your application and then export it to one joined file or use any e.g. hex editor to merge the two separate files. Best regards, Nino

  • Hello, We received your inquiry through the ticket system as well. Please try to keep you inquires to one channels to make sure no information gets lost. This thread will be closed now. Best regards, Nino

  • Hello Jules, Thank you for your inquiry. Such an issue is not known to us. Could you open a support ticket in that case? You can find the link in my signature. Best regards, Nino

  • Hello David, Thank you for your inquiry. Quote from dvalencia_salto: “Do you have plans for it? Do you have an estimate availability date? ” It is planned but no estimate yet. We could prioritize this Flashloader over others. In that case NREs would apply. Would that be of interest for you? If yes feel free to contact us via our support ticket service linked in my signature. Quote from dvalencia_salto: “Apart from OpenFlashLoader CortexM Template, Is it possible to download source code for other…

  • Hello, In your last picture you are using the STR9 commander. Before you tried to connect to the NXP S32K14 series. Which one is it? Best regards, Nino

  • Hello, Thank you for your inquiry. Generally tracing with Cortex-A9 is supported by J-Trace PRO so the described issue is most likely related to an incorrect/incomplete trace init. (But getting any trace clock is already a good step in the right direction ). How to use a JLinkScript for that task is described here for Cortex-M: wiki.segger.com/How_to_configu…t_files_to_enable_tracing Unfortunately there are currently no eval boards available on the market with a Zynq 7020 that would have the tra…

  • Hello, Thank you for your inquiry. We are aware of that issue as unfortunately ST made the decision with the STM32H7 to "hide" some trace related modules behind the APB instead of AHB as it is usual for Cortex-M7. That way the generic trace init process becomes highly ungeneric. So currently ETB on the H7 is not supported out-of-the box as it would usually be on any other Cortex-M device. However it is still on our todo but the priority is not very high as the H7 also offers ETM tracing over pin…