Search Results

Search results 1-4 of 4.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Excellent news! It'll be great to see a new version. Thanks, Andrew.

  • Hello Arne, Thanks for your reply. I've sent you the .axf file in a private conversation. Please let me know if you have any problems with it. Best regards, Andrew.

  • Hello, I've been trying to use Segger J-Scope with our IMXRT1052 PCB (developed internally) over SWD (using a J-Link Pro, running firmware 6.42f). The program shuts down silently (with no message) upon clicking "OK" in the J-Scope Configuration dialog; this occurs both with version 5.10d and the beta version 6.11m. I'm running under Windows 10 Pro, version 1803. I follow the following process: 1. Start J-Scope and select to create a new project. 2. I select a USB connection, checking the Serial …

  • Hello, We are trying to use J-Link (V6.32h) to program QSPI flash on an NXP IMXRT1050-EVKB development board. We have modified the board as per the NXP instructions to enable QSPI, and we have modified the JLinkDevices.xml file, according to the instructions on the Segger Wiki. The problem is, although programming works, erasing mostly doesn't. It is necessary to use MCUXpresso with the dev board OpenSDA interface in order to erase the flash device. J-Link can then program the flash device. If t…