Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello, Thank you for your inquiry. Pylink is not supported or maintained by SEGGER so unfortunately we can't provide information on this matter. So we recommend contacting Pylink support in this regard. We will leave this open for a bit should someone from the community have an answer. Best regards, Nino

  • Hello, Thank you for your inquiry. The iMXRT1011 will be supported with the next J-Link software update. You can subscribe to our notification list to stay up to date: segger.com/notification/subscribe.php?prodid=7 Best regards, Nino

  • Hello, Thank you for your inquiry. The memory map in that J-Flash program is simply completely wring, this is why it does not work correctly. Attached you can find how it should look like. It seems that you are using a J-Link software that is quite old. We recommend using the latest one and create a new J-Flash project using the project wizard. Then everything should work as expected. One more thing I noticed. The project you set up here selects the "allow opt. bytes" versions of the F103. Do yo…

  • Hello, Correct as the J-Trace PRO has not application reference but only gets information from that target which instruction has been executed but not in what context. When you get your hands on a J-Trace PRO the following article will explain how you can use trace without having source or symbol information of the application: wiki.segger.com/Getting_unknow…sses_in_instruction_trace Best regards, Nino

  • Hello Ewout, Thank you for your inquiry. If you need to know what the application context is and want to use the streaming trace e.g. timeline feature we recommend having an elf file with all debug information and if possible without any optimization. segger.com/products/developmen…echnology/trace-features/ This features might also work with optimization levels maximum if the application is not to complex and Ozone can deconstruct the context from other information. However in release builds deb…

  • Hello, The long term goal is to merge both editors into one codebase so they have both the same features. But as both products were created independently and with different use cases in mind it could take some time to merge this. Best regards, Nino

  • Does Ozone support CMSIS-DAP?

    SEGGER - Nino - - General

    Post

    Hello, Thank you for your inquiry. CMSIS-DAP is currently only supported in Embedded Studio. In future it is planned to roll out a licensing model to use CMSIS-DAP with other J-Link software e.g. Ozone as well. But currently there is no fixed time frame and pricing is also not yet available. Best regards, Nino

  • Hello, Great to hear that you are up and running again. Quote from Sergey22: “I did not try clang however, do you have any use cases for comparing ouptu size from clang and ARMCC? ” Clang with default optimization settings is actually a bit worse than gcc in code size as the embedded support for clang was added more of an afterthought. But Embedded Studio is not just another gcc toolchain. With our own standard library that is highly optimized for embedded targets and our SEGGER Linker together …

  • Hi Pascal, Thank you for your inquiry. If you don't want to use the default libraries of Embedded Studio you can disable it in project settings under Library->Include Standard Libraries->No. Could you elaborate why you would want to do that though? ES is not using the standard newlib but a highly optimized version tailored for embedded targets. So for most cases it is not wise to use a third party library as this will slow down your code and increase code size. Here is a comparison with other li…

  • Hello Marco, This has been discussed here already: [SOLVED] ST-Link Reflash Utility for ST-LINK V3E ? There are currently no plans for a reflash utility for ST-Link V3. This thread will be closed now as duplicate. Best regards, Nino

  • Hello, Great to hear that you are up and running again. It appears that the config area could not be programmed correctly for some reason. We will monitor this and see if it appears again or if this was just an unlucky coincidence. This thread will be closed now. Best regards, Nino

  • Hello, Thank you for your inquiry. The reflash utility is only available for Windows. Linux or mac versions are not planned. When using a VM make sure that USB devices are forwarded correctly to the VM. For more information consult the VM supplier. Best regards, Nino

  • Hello Paul, Thank you for your inquiry. Please note that the open flash loader interface is provided without support so we can offer only guidelines. Could you provide your J-Flash project file for reference? Do you do a chip erase there before programming? If yes, try issuing a chip erase before download in Ozone. How is explained in Ozone manual. What about the encrypted data in QSPI. Is this modified by your application or does it stay encrypted in QSPI? Regarding the overall operation speed,…

  • Hello, Thank you for your inquiry. Yes an external toolchain can be used with Embedded Studio. The following guide shows a how to when using IARCC and importing it to use internal toolchain + troubleshooting steps: wiki.segger.com/Port_Projects_…kbench_to_Embedded_Studio The steps for ARMCC are similar. However we recommend to do the port to gcc/clang manually because that way you save the time getting the external toolchain running on Embedded Studio and can directly start the porting process o…

  • Correct. Because Ozone needs to know what is running on the target to be able to crossreference the received compressed trace stream from the target. Best regards, Nino

  • Hello, Thank you for your inquiry. Troubleshooting steps for this error message can be found on our website in the FAQ section: segger.com/products/development-tools/systemview/ Best regards, Nino

  • Hi Eyal, Could you provide an example Embedded Studio project for reproduction that shows this behaviour? Best regards, Nino

  • Hello, From the provided files it does not appear that something is linked to that memory area. But you seem to be programming a softdevice: mbr_nrf52_2.4.1_mbr.hex If I had to guess the memory area on the screenshots fits the memory area covered by that hex. Could you check? Best regards, Nino

  • Hi, Sorry for the delay in response. This should be fixed since ES V4.24. Best regards, Nino