Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello Denis, Great to hear that you are up and running again. As you correctly found out there is a big difference between selecting the generic k81 device name and the one allow setting the security bits. I assume that by using the latter some of the Flash lock bits have been set which lead to the follow up issues you have experienced. Make sure to use the enable security device selection only if you want to lock your target device indefinitely e.g. after production. We do not recommend using t…

  • Hello, Thank you for your inquiry. Long load times in Ozone usually result from complex nested symbol information in the elf file which can sometimes appear "suddenly" even if the code change was small, the compiler output hower has changed significantly. But of course we try to improve Ozone here gradually so even more complex and nested elf files can still be interpreted quickly as you are used to. Which Ozone version are you currently using? Could you try the latest one and see if the behavio…

  • Hello, Thank you for your inquiry. We received your inquiry via our support system as well. To make sure no data gets lost this thread will be closed now. Information for others who end up here: The issue seems to have been related to the host PC. It got resolved as follows: Resolved by entering netsh http add iplisten 0.0.0.0 Best regards, Nino

  • Hello, Thank you for providing the elf file. There seems to be a misconception on how the Elf.GetBaseAddr(); command works. We have addressed this in the next revision of the manual so it is more clear. Esentially GetBaseAddr will simply return the lowest address of your elf image. This can be the beginning of a vector table but can also be some kind of bootloader or other data. To get the value of the Reset_Handler PC you can use ELF.GetEntryPointPC instead. I hope this is more clear now. Best …

  • Hello, Thank you for your inquiry. To make sure we understand you correctly here, you are essentially looking for a way to inherit include paths that are set in e.g. a library project also to the executable project in the same solution. Is that correct so far? If yes then you can do this via solution settings instead of project settings. That way all projects within the solution will inherit the options set on solution level. Is this what you are looking for? Best regards, Nino

  • Hello, Thank you for your inquiry. To make sure we understand you correctly here, is everything working now? Best regards, Nino

  • Hello, Thank you for your inquiry. Everytime you close Embedded Studio for the last open project an .emSession file will be created which saves all current window positions etc. If you load the corresponding .emProject file next time in SES the settings from the .emSession file will be applied. Is that what you were looking for? Best regards, Nino

  • Hello Owain, There have been no changes to SES yet in this regard. If you use the Registers.xml from the CPU support package in SES as explained in the linked thread everything should be working as expected. Best regards, Nino

  • Hello, Thank you for your inquiry. Such an issue is not known to us. What exactly does the error message say? Which version of Embedded Studio are you using? From the log we can not see any issues. Could you provide an example project for reproduction purposes? Best regards, Nino

  • Hello, You are welcome. We will consider this thread as solved now. Best regards, Nino

  • Hello, Thank you for providing the init script. The chunking of writes you see in GDB Server is done by the GDB client you are using. GDB Server will simply execute whatever the GDB Client sends him. Please understand that we have no influence over this so it would need to be fixed from GDB Client perspective. For reference you can try downloading your image with J-Link Commander instead using the loadfile command. This will download the image in larger chunks so the bottleneck is on the target …

  • Hello Mateusz, Thank you for your inquiry. Such an issue is not known to us. Could you try using our latest J-Link software to make sure we are not looking for something that has already been improved? segger.com/downloads/jlink/ Could you also try to bump up connection speed. 4 MHz is rather slow and a higher interface speed means more data can be transfered in the same amount of time. Is the SDRAM script compatible to a MIMXRT1050-EVK ? If yes could you provide us with the SDRAM script and an …

  • Hello, Quote from tronic: “thank you very much for replying. I'm just wondering how variables can be out of scope inside a task of FreeRTOS which is always running and never gets quit. It would be fatal if the memory location is used for something else. Do I miss something?` ” Is it running all the time? No scheduler action or interrupts in between or similar? Does it not work declaring the variable in a static scope? Quote from tronic: “Could you maybe reply to the following question as well: I…

  • Hello, We tried to reproduce the reported behaviour but everything was working fine using V6.48b and a TWR-POS-K81 board. See programming result attached. The example hex file that has been used for testing is attached as well. Could you give the latest J-Link software version a try? Does programming the example hex file work? Could you provide a J-Link log of your session? wiki.segger.com/Enable_J-Link_log_file Best regards, Nino

  • Hello Markus, Thank you for your inquiry. Currently there are no plans to add RTX to our shipping files. But if you could share your implementation we can take a look and see if it could be added. Best regards, Nino

  • Hello, Thank you for your inquiry. Currently there is no automated tool that would allow this. So you would have to do it manually. Alternatively we recommend using our tool emBuild for CL building. Simply install Embedded Studio on your Jenkins server and call emBuild with the corresponding parameters (more information on usage are in ES manual). That way you can simply move your emProject file and source between different PCs without needing to switch tools or do any conversions. Best regards,…

  • Hello, Thank you for your inquiry. You can run the static code analyzer by right clicking a source file and selecting "Run Static Code Analyzer". It is currently not documented unfortunately. This will be fixed with the next manual revision. Best regards, Nino

  • Hello, Quote from Damon Kelly: “Surely the IDE can distinguish between the 2 original file names? ” Usually yes, which is why I wrote that the issue is not known to us. Could you answer my remaining questions? Quote from SEGGER - Nino: “Could you provide an example project for reproduction purposes? Do you get the same behaviour when debugging with Ozone? segger.com/products/development-tools/ozone-j-link-debugger/ ” Best regards, Nino

  • Hello, Thank you for your inquiry. Sorry for the delay in response but this forum is not our official support channel so response times may vary. For more information see my signature. Regarding the trust zone issue. Which Ozone version are you using? Could you provide an example project that shows the behaviour? What would be the expected behaviour instead for you? Best regards, Nino

  • Hello, Thank you for your inquiry. You can fix this by installing the missing libraries or using a Linux that has them per default e.g. Ubuntu 16.04 LTS or 18.04 LTS. It is currently not being shipped with SystemView as SystemView is currently being revampt. So future versions of SystemView should ship with all needed libraries even if not provided by the OS. Best regards, Nino