Search Results

Search results 1-2 of 2.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • MSP432 cannot be flashed

    D.F. - - J-Link/Flasher related

    Post

    Thank you for the reply I think one of the problems is the erase algorithm. I've tried the following: IAR Embedded Workbench 8.32.1 Just create a dummy main.c project for the MSP432P411Y Download the dummy project in the target Now in the memory window, select Flash as memory Now try to fill the flash with 0x0 from address 0x0 length 0x100000 (1MB) Then go at address 0x80000 (upper 512KB start): the memory has NOT been filled! If you try to fill from address 0x80000 for length 0x80000 (upper 512…

  • MSP432 cannot be flashed

    D.F. - - J-Link/Flasher related

    Post

    Hi I have a J-Link for Arm 8.0 and I'm trying to flash an MSP432 with 1MB internal flash (MSP432P411Y). The J-Link drivers are v6.44h. If I try to program the chip with UniFlash from TI or with IAR Embedded Workbench (meaning, only image download without debugging), the tools report a programming failure. It seems that only the first 512KB can be programmed. Addresses above this limit cannot be programmed. If instead of using the J-Link I use a TI MSP-FET debugger, everything works fine with the…