Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello, Thank you for your inquiry. Generally all cores that follow standard RISC-V RV32 implementation are supported by J-Link. Quote from dsula: “I've taken up this issue with Syntacore and according to them J-Link is NOT compatible with SCR1 (as of March 2019). The only supported option is to use OpenOCD. ” This is quite a worrisome statement by Syntacore as we specifically implemented support for the SCR1 for them... See here for more information with example projects etc.: wiki.segger.com/Sy…

  • Hello, Thank you for your inquiry. From the google links I could not find what core type the Telink chips are. Generally they are currently not supported. If they are Arm cores then you could add support yourself with our Open Flashloader interface. If they are some proprietary core type it is not supported by J-Link. Best regards, Nino

  • Hello, Thank you for your inquiry. We are not exactly sure what you mean from the example you provided. Could you provide a bigger snipped where one can see where the BP is actually set? What behaviour would you expect? What steps do you take when setting the BP? Does the target not halt when reaching the conditional statement? Best regards, Nino

  • Hello, Thank you for your inquiry. Please be aware that this forum is a community forum so there is no guarantee to receive a response here. We tried to reproduce the reported behaviour but everything was working as expected in our example setup. See successful connect sequence attached. Are you using a RX adapter between J-Link and target device? segger.com/products/debug-prob…ries/adapters/rx-adapter/ or segger.com/products/debug-prob…adapters/rx-fine-adapter/ Are the 5 V VTref expected? Could…

  • Hi Hans, We received this inquiry via Supportsystem as well. To keep all information in one place this thread will be closed now. For everyone else, the minimum recommended RAM size is 5-6 kB. Best regards, Nino

  • Hello Dave, Thank you for your inquiry. Please be aware that this is no official support forum so there is no guarantee to receive a response here. If you are entitled to support see my signature for more information. Quote from dmarples: “I can't say which chips it supports but it certainly works with the IS25LP064A as found on the 1021-EVK. ” A list with supported Flash chips can be found here: segger.com/products/debug-prob…es/supported-spi-flashes/ EDIT: Just noticed that we received your in…

  • Hello, Thank you for your inquiry. What is the actual name of the target device you are looking to debug? Is it on our public supported devices list? segger.com/downloads/supported-devices.php If not but it is one of our supported core types you can add support yourself: segger.com/products/debug-prob…pported-cpus-and-devices/ wiki.segger.com/Adding_Support_for_New_Devices Best regards, Nino

  • Hello, Thank you for your inquiry. The folder you are trying to write to is write protected by admin rights. Simply select another saving location for your project file and you should not see this error message anymore. Alternatively operate J-Flash with admin privileges if you really want to write into the installation folder. Best regards, Nino

  • Hello Hans, We received your inquiry via Supportsystem as well where the topic has been solved. A fixed version will be available with our next J-Link software beta. This thread will be closed now to avoid double information. Best regards, Nino

  • Hello Hans, Thank you for your inquiry. We received your inquiry via our Supportsystem as well. To avoid double information this thread will be closed now. Just a quick info to other readers. We were able to improve the load time in this case to around 15 s. The improved version should be available with the next Ozone release V2.62. Best regards, Nino

  • Hello, Thank you for your inquiry. You can gather RTT data with any client that uses telnet: segger.com/products/debug-prob…about-real-time-transfer/ See section RTT Communication. Best regards, Nino

  • Hello, Thank you for your inquiry. A guide on how to instrument NoOS applications can be found on our Wiki: wiki.segger.com/Use_SystemView_without_RTOS Best regards, Nino

  • Hello, It is currently no possible to set a JLink settings file in SystemView or a JLinkScript file. In the next release version of SystemView it is planned to have a CL option to set a specific JLinkScript file. To set a J-Link log file you can do so globally: wiki.segger.com/Enable_J-Link_…le#Enable_J-Link_Log_File Best regards, Nino

  • Hello, Thank you for your inquiry. The iMX8 is currently not officially supported by J-Link, it is not coupled to the Embedded Studio version. So it won't help going the IAR route as they depend on our official support as well. Current estimate for official support is ~1 month from now. However you can add support to devices at any time your self using our open flash loader interface: wiki.segger.com/Adding_Support_for_New_Devices The only prerequisite is that the core type is supported and with…

  • Hi, OK thank you for confirmation. This thread will be closed now. Best regards, Nino

  • Hello David, Thank you for your inquiry. Zephyr and mbedTLS support is not provided by Segger. We recommend contacting Nordic in this regard. From the error message it seems that the macro MBEDTLS_CONFIG_FILE is not defined. You could try defining this manually or replace it with the actual file path. Best regards, Nino

  • Hello, Thank you for your inquiry. Such a possibility is currently not available with SES. But you could check out the nRF Connect for Desktop Tool from Nordic Semi. This should bring the capabilities you are looking for. Best regards, Nino

  • Hello Duy, Thank you for your inquiry. You can set specific load addresses for your application with the linker. Embedded Studio comes with GNU Linker or Segger Linker. More information on how to use the linkers can be found in the Embedded Studio user guide if you press F1 in Embedded Studio. Best regards, Nino

  • Hello, Thank you for your inquiry. Such an issue is not known to us ES for Linux is of course still available. Could you provide a screenshot of the "old" looking website? Does it help when clearing browser cache and revisiting the site? Best regards, Nino

  • Hello, The LS20088 is currently not officially supported: segger.com/downloads/supported-devices.php However you can add support yourself if needed. How is explained here: wiki.segger.com/Adding_Support_for_New_Devices For target related questions we suggest getting in contact with the silicon vendor. Edit: I just saw you already opened a ticket. In that case this thread will be closed now so no data gets lost between the different communication channels. Best regards, Nino