Search Results

Search results 1-20 of 664.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hi, Sorry for the delay in response and thank you for the inquiry. Regarding the issue: The template is used by a lot of our customers to create Flashloaders. It was thoroughly tested and its functionality verified. If you have trouble, I would suggest to take a look at the troubleshoot section: wiki.segger.com/Open_Flashloader#Troubleshoot Regarding the templates: We do not provide any Flashloader templates for third party IDEs and there are no plans to add any. The Flashloaders are supposed to…

  • Hi Nick, Did the suggested solution work in your case? Best regards, Fabian

  • Hi Phil, Good to hear that you are up and running again. As this issue is resolved we will close this thread now. Best regards, Fabian

  • Hi, J-Flash is SEGGER's professional solution for production purposes. As it is legally forbidden to use the J-Link EDU in any kind of commercial context, it would not make sense for it to come with a license for J-Flash. To flash you device I would suggest either: - J-Link Commander: wiki.segger.com/J-Link_Commander#Perform_flash_download - J-Flash Lite: wiki.segger.com/J-Flash_Lite Does this answer your question? Best regards, Fabian

  • Hi, Thank you for your inquiry. If I understand you correctly, I assume that this article will most likely help you: wiki.segger.com/UM08001_J-Link…#Reset_unlock_message_box Please note that security/unlock procedures are never generic, but always device specific. Therefore it is not possible to give a always working solution without knowing which device your are working with exactly. If the article does not help, we would require more details about your setup. 1) Which device are you working wi…

  • Hi, Thank you for your inquiry. Currently, there is no way to prevent this from happening. I will raise this as a topic on our next internal meeting and come back to you as soon as I have news regarding this. Best regards, Fabian

  • Hi, I can see that you also contacted us via the Support Ticket System. I already answered you there. We will close this thread, to keep communication to one channel. Best regards, Fabian

  • Hi, Thank you for your inquiry. Some additional information would be useful: 1) What is the exact name of the device you are trying to connect to? 2) Are you working on an evaluation board or custom hardware. If evaluation board, which one? Best regards, Fabian

  • Hi K, Thank you for your inquiry. Could you please open a ticket in our support ticket system for that? You can find the link below in my signature. Information we would require in the ticket: 1) Reference of this thread by link. 2) Pins you are using for QSPI 3) Is it a custom or evaluation board? If evaluation board, which one? As all further communication will be handled over email, we will close this thread now. Best regards, Fabian

  • Hi, We did not forget about this. The problem here is, that we currently have a lot of projects with their timeline approaching. This issue will be addressed as soon as possible, however, there are currently no resources available for this. We will come back to this thread as soon as we fixed this issue. Alternatively / additionally you could subscribe to our release newsletter: segger.com/notification/subscribe.php?prodid=7,94 We are sorry for any inconvenience caused. Best regards, Fabian

  • Hi, From the logfile I can tell that you are using J-Link software that is actually pretty old. Could you please update the J-Link Software? You can find the latest version of the J-Link Software Pack here: segger.com/downloads/jlink#J-L…twareAndDocumentationPack By default, the J-Link DLL Updater is automatically executed at the end of the installation process. After the J-Link DLL Updater closes without warning, the J-Link files should be up to date. Does it work after the update? Best regards…

  • Hi Guillaume, Could you please provide us with a reproducer for this? Best regards, Fabian

  • Hi, Thank you for your inquiry. There is no such issue known to us. At first glance, this does not necessarily look like a J-Link related issue. What Device are you trying to debug exactly? Could you please send us a J-Link log file? How to enable: wiki.segger.com/J-Link_DLL#Enable_J-Link_Log_File Could you please provide us with step-by-step instructions on how to reproduce this issue? Best regards, Fabian

  • Hi, Thank you for your inquiry. We are not aware of any issues related to the STM32F1 series and JTAG. I just gave this a quick try and it seems to be working without any issues on an STM32F10X-128K-EVAL board (STM32F103V8): forum.segger.com/index.php/Att…1781b5b14dbfd40fcfc0817fe Do you experience the same issue on an evaluation board? Could you please send us a J-Link log file? How to enable: wiki.segger.com/J-Link_DLL#Enable_J-Link_Log_File Best regards, Fabian

  • Hi Priya, Thank you for your inquiry. I am sorry, but I do not quite understand what you are trying to achieve. Could you please explain in more detail? In general: 1) .bin files do not contain any address information, so when opening them in J-Flash you have to provide a start address. Otherwise, J-Flash cannot know where it is supposed to download the data to. 2) The screenshot you provided shows that your project currently only allows to flash data to 0x0-0x3FFF. To flash data to 0x4000 - ...…

  • Hi, Good to hear that you were able to resolve the issue. We will close this thread now. Best regards, Fabian

  • Hi, We are not aware of such an issue. You can find an example blinky project for the RP2040 here: wiki.segger.com/Raspberry_Pi_Pico#Example_Projects It should be working out of the box for Ozone / Embedded Studio. Could you please give that one a try? Best regards, Fabian

  • Hi, As this inquiry is resolved, we will close this thread now. Best regards, Fabian

  • Hi, Thank you for your inquiry. Yes this is possible by using a J-Link Command string: wiki.segger.com/J-Link_Command_Strings#SetCompareMode How you can use them is also explained in the same article: wiki.segger.com/J-Link_Command…ng_J-Link_Command_Strings I will also mention this in our next internal meeting. Maybe we can add an option to enable that some settings are remembered when changed in the control panel. Best regards, Fabian

  • Hi, Sorry for the delay in response. If everything is working correctly, flash can be written with the w* commands. As Alex already said however, this might not be the case for your device, as it is not officially supported and might be different regarding flash programming. Best regards, Fabian