Search Results

Search results 1-20 of 34.

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hello Nino, thanks for the feedback. Bye the way, Comments in XML-Files are not colored properly. I would expect that the angle bracket which enframe comments are also colored like the rest of the comment. Best regards

  • Hello Nino, find attached a simple project. Open the File fsl_flexcan.h and scroll to line 675 to find an example for the ampersand issue. Regarding issue 3, enable the two options - visible whitespace Edit --> Others --> Visible Whitspace - Highlight All Selected Text Tools --> Options --> Text Editor --> Highlight All Selected Text Open the file main.c and select a space character, for example the one after the keyword ‘for‘. You should see the behaviour from my screenshot. I have one more for…

  • Hello Segger-Team, the menu entrys Search --> Find Extra --> Find in Solution Search --> Find Extra --> Find in Project Search --> Find Extra --> Find in Document seems to do nothing. Nothing happens when using this. I checked this in Embedded Studio Version 5.34 Best Regards

  • Hello Segger-Team, I found some issues with syntax-highlighting in Embedded Studio, maybe you could solve those: - Ampersand in comments leads to a highlighted line: forum.segger.com/index.php/Att…0d37d6c4ad6c1d2df2bb6a097 - If you enable the option “visible whitespace”, XML Files are not rendered correctly. For example, the project File: forum.segger.com/index.php/Att…0d37d6c4ad6c1d2df2bb6a097 vs. forum.segger.com/index.php/Att…0d37d6c4ad6c1d2df2bb6a097 - When the options “visible whitespace” a…

  • Hello Fabian, no further questions, thank you Best regards

  • Hello Fabian, thanks for the Update. ARM is only referring to the Address in the documentation. Segger is using an Index. The correlation between both was unclear to me. Best Regards

  • Hello Fabian, the Indexes you are using for JLINK_CORESIGHT_WriteDP seems not to be related to the addresses of the registers which you can find in the ARM specification. Compare developer.arm.com/documentatio…tation-specific-registers The Register Addresses are * Address * Read * Write * 0x00 * IDCODE * ABORT * 0x04 * CTRL/STAT * CTRL/STAT * 0x08 * RESEND * SELECT * 0x0C * RDBUFF * N/A Therefore, it would be good to have the values in the documentation Best regards

  • Hello Fabian, thank you for your feedback. What do you mean with usually? Is this dependent to the used controller? NXP is using ‘JLINK_CORESIGHT_WriteDP’ regular with a number instead of the symbolic constants, therefore is it possible to get a full list with the relates indices? Thanks, and best regards

  • Hello Segger Team, I try to understand a JinkScript for the iMXRT685 which comes with the SDK from NXP. They call JLINK_CORESIGHT_WriteDP like this: Source Code (1 line) According your documentation, the first parameter can be one of - JLINK_CORESIGHT_DP_REG_IDCODE - JLINK_CORESIGHT_DP_REG_ABORT - JLINK_CORESIGHT_DP_REG_CTRL_STAT - JLINK_CORESIGHT_DP_REG_SELECT - JLINK_CORESIGHT_DP_REG_RDBUF - JLINK_CORESIGHT_AP_REG_CTRL - JLINK_CORESIGHT_AP_REG_ADDR - JLINK_CORESIGHT_AP_REG_DATA - JLINK_CORESIG…

  • Hello Segger Team, When trying to copy a selected Folder in the Project Explorer via the shortcut CTRL-C/CTRL-V it is always failing until using the Copy-Function from the context-Menu. After using this, the CTRL-C-Copy is also working. You can reproduce it with the default Project when copying the Setup Folder into the Source folder, or vice versa. Regards

  • Hello hiqrf3, are you using multiple projects in a single solution? In this scenario the indexer seems not to work in embedded Studio, or at least not working properly when regularly switching between these projects. Regards

  • Hello Nino, I’ve only enabled the „Use Tabs” Setting for C and C++ like this: Tools --> Options --> Languages forum.segger.com/index.php/Att…0d37d6c4ad6c1d2df2bb6a097 And I enabled the visibility of white spaces to make the behavior better observable Edit --> Others --> Visible White Spaces Use the default project and ‘tabbify’ it like this: forum.segger.com/index.php/Att…0d37d6c4ad6c1d2df2bb6a097 Press Enter after the printf-statement. Embedded Studio is automatically intending to the level of …

  • Hello Segger Team, when Tabs are configured, spaces are still used for automatic indentation. For example this code from the default project: forum.segger.com/index.php/Att…0d37d6c4ad6c1d2df2bb6a097 When pressing enter at the end of the line with the printf-statement to enter an additional printf statement, spaces are used to intend. forum.segger.com/index.php/Att…0d37d6c4ad6c1d2df2bb6a097 In addition, the default values of the options are bit uncommon. Why distinguish between “Tab Size” and “In…

  • Hello v01d, Quote from v01d: “ I do not think I understand you. Because, I _can_ connect & debug multi-core (multi ARM A core) to be specifically, on a SoC I used. Not only that, but with single JTAG I can connect to 2 A cores (SMP config) and one M core at the same time (for AMP thus). ” within a single instance of … whatever software you are using? It is possible to connect to multiple cores of a single controller with a single J-Link adapter. But you have to use multiple instances of the Appl…

  • Hello v01d, we had also the same problem, so I think I can answer your question. Quick answer: No it is not possible. The problem is not Embedded Studio, but the J-Link Adapter. We had the same problem with a different Development Environment which supports what you are requesting for. However, we couldn’t use it as the JTAG-Adapter has to support multi-core debugging. J-Link doesn’t ☹. Therefore, we had to switch to a different vendor. Hope Segger is adding this feature as we would like to use …

  • Hello Matthew, There is also a theme option under “Environment” -> “Theme”. This one makes the whole application dark, not only the Code-Editor. But seems like there is a problem with this option on MacOS. Compare this thread: forum.segger.com/index.php/Thr…x/?postID=23230#post23230 Regards

  • Hello Matthew, 1) - Select your project in the Project Explorer - select project -> Properties in the menu. Or select “Edit properties” in the Context Menu - search for “Optimization level” - select the one you like Hint: you can use separate Optimization levels for separate folders and Files. If you want to configure the whole project ensure you have selected the whole project in the Project explorer Hint2: If you want to have the optimization enabled only in release Build enshure to select "Re…

  • The “Close All” entry of Context-Menu which comes up when you do an ”long-left-click” on the big X on the upper right corner (where you are closing opened files) of theSource-Code-Dock seems to do what you are searching for. Best Regards

  • I think Segger will only support their own JTAG-Interface. But the older sibling of SES supports CMSIS-DAP. Regards

  • Hello Nino, Tanks for the feedback. Unfortunately, there are still problems. When switching the ‘Wide Character Size’ Option to 16-bit. CLANG is creating an error while GCC is working. Do you have also a solution for this? Best Regards