Search Results

Hello forum users, I working on project with CortexM4. For debugging I am using Jlink ultra+, with sw. version 7.88k. I want to use Jscope with RTT, for this I instrumented my software as suggested in (J-Scope_RTT_Example.zip). First Jscope was not able to find control block on my platform. I changed command line to specify search range JScope.exe -openprj"..\SeggerJScope\Scope.jscope" -RTTSearchRange,0x1FFFC000,0xA000. In Jscope project I selected RTT mode, SWD 4000kHz. When checked with debugg…

Thank you Nino for pointing me to updated patch file. I tried to apply this patch created for 10.4.3 to version 10.4.6. It still fails on many points. I attach screenshot and also "rej" files.

Hello forum users, do you know if patch file to modify FREERTOS kernel version 10.4.6 for use with SystemVIEW V330 exists? I tried one provided inside "SystemView_Windows_V330_x64.zip" but the differences between OS version from which it was generated and 10.4.6 are too big and patch cannot be applied successfully. rum

Hello Leon, you have very good sight, I have copied those dashes with words from manual just to be sure because before I was using just one dash. now it works, thank you !!! rum

Hello Leon, it is posted on 25/1. here it is again "C:\Program Files (x86)\SEGGER\JLink_V642\JLinkRTTViewer.exe" -–autoconnect --serialnumber <my serial> -–connection sess if you missed, I am also using two jlinks. thanks for helping, it is really only a small issue rum

Hello Lenon, 1. problem with -autoconnect remains also with 6.42 2. problem unspecified script file solved regards rum

Hello Leon, this dialog in attachment… I thing that when "autoconnect" option is used it should no appear? before I had on line "script file" = unspecified (which is default setting), as seen in previous post. When you hit OK, appeared warning "scrip not found". This is not occurring anymore since I deleted "unspecified". rum

Hello Leon, I already figured out from manual that I have to use "two dashes" version, so in my case "C:\Program Files (x86)\SEGGER\JLink_V640\JLinkRTTViewer.exe" -–autoconnect --serialnumber <my serial> -–connection sess (because I use also debugger), I see now that serial number is populated... but still I cannot get passed dialog window additional info: I have two jlinks attached on usb thanks for help rum

Hello, I am trying to start using command line options like this: "C:\Program Files (x86)\SEGGER\JLink_V640\JLinkRTTViewer.exe" –autoconnect -serialnumber 1111111111 serial number is of course the right one my problem is that dialog box appears even when it is suppressed by autoconnect when I confirm by OK, another dialog appears with serial number selection, after that last warning message appears as shown here bellow how can I connect directly without dialogs?

Hello Segger team, I tried 611k version, but it is crashing with Windows error (win10) immediately after I confirm dialog to establish connection and select first variable. Previous 611j is working fine. rum

Hello support, I am using Systemview 240a on project with freertos. When I want to record ISR which is not under OS I just simply use traceISR_Enter and traceISR_Exit at the begining and end of interrupt routine. However ISR under OS I usually terminate with portEND_SWITCHING_ISR(xHigherPriorityTaskWoken) to optimize. This macro already contains traceISR_Exit. If I don't want to monitor such interrupt, problem arises that entry is not marked but exit is. Do you have any suggestion? rum

Hello support, I am using Systemview240a and stand alone it works. But in documentation is written that it should work also parallel with debugger. My configuration is winIDEA debugger with ULTARA+ jlink, speed configured to 50000kHz. What settings in debugger I should make to make it work. Please let me know what is the correct sequence since when Systemview connect to target it resets. I would like to capture recording between two breakpoints. thank you rum

Hello, where I can download previous version, 2.12c crashes when opening existing project, does not permit set breakpoints, does not allow high level debugging, disassembly window shows (no program data) thanks

Hello, I run on remote PC Jlink remote server tunneling mode and connect sucessfuly to SEGER server. this is Ok. I run on local PC Jlink.exe and choose conenction via IP tunnel, type serial number and I get connected. So far it is Ok. Now how can I debug my remote connected target using Segger debugger? Or winIDEA debugger? When creating new project, I choose IP connection and ype address of segger 85.114.137.111 but debugger is never connected - I get fail message. any advice?

Thank you this syntax for range search, now it works. rum

Thank you Johannes for support and solving the problem.

Instead if (memcmp(pcTaskName, "IDLE", 5) == 0) { return; } maybe this is faster if(*(uint32_t*)pcTaskName == 0x454C4449) return; //'ELDI=IDLE' rum

Thanks. Version 2.30 solves the problem.

Hello, Thank you, new version 2.3 is much better and is running now on my XMC device. Great! I have another problem. Recording halts after about 5sec with message "Invalid packet received, Recording stopped". Attached is screenshot with last actions recorded. Do you have any suggestions? I am running SWO interface at maximum speed 50MHz and I am using ULTRA+ probe. rum

Of course file is included. When Systemview attaches, application will crash. I have increased stack for all tasks, now there is plenty of space >200byte as suggested. I have stack overflow monitor in place and I think it is not the stack. I cannot detect reason why application resets. There is no useful info from callstack. I find application sitting at reset vector. I have also applied patch to freeRTOS. What else can I check?