Search Results

Hello Erik, Thanks for your reply. I tried a few steps, as follows: 1. A J-link debugger was used instead of the boot kit. It did not resolve the problem. 2. However, if BMI is correctly set, both - the J link debugger and Boot kit can program flash. 3. Again, the problem is - that sometimes the BMI cannot be set. Out of a lot of 100 boards, you would have 15-20 boards whose BMI cannot be set. These boards are set aside. If the same thing is tried - maybe a day later, you would have BMI set in a…

I am using xmc1300 boot kit CPU-13A-V1 with DAVE 3 for my target board with XMC1302 (infineon) microcontroller. On some of the boards connectivity is proper and debugging is possible. However in some boards there is a connectivity issue. SEGGER J-Link Commander V4.98c ('?' for help) Compiled Apr 23 2015 20:22:10 DLL version V4.98c, compiled Apr 23 2015 20:21:50 Firmware: J-Link Lite-XMC4200 Rev.1 compiled Nov 28 2014 17:08:37 Hardware: V1.00 S/N: 591003749 VTarget = 3.300V Info: TotalIRLen = ?, …