Search Results

Hi. Cntdown.txt Is it possible to program different numbers of programming cycles for each file? Or the counter is unique and discounts each one that records any of the files. FLASHER.INI [FILES] DataFile = "First.dat" ConfigFile = "First.cfg" DataFile1 = "Second.dat" ConfigFile1 = "Second.cfg" Best regards. Jk

Ok. Thanks.

Hi STM32F1x 128sector. Write-protection granularity is four sector (FLASH-WRPR). I need to protect against writing some sectors of the microntroller. J-FLASH (ST STM32F1x (allow opt. Bytes). And with flasher i need Standalone (Secure chip). Is there any menu option in the J-FLASH to program this? Or it would have to do it through EXIT STEPS. Best regards Jk

Hi Is it a lithium battery? Being a lithium battery, it can not travel in the plane's load. Is the battery replaceable when it breaks down? Can it work without a battery? Best regards Jk

Hi I'm trying Stand-alone mode (Flasher User Guide (UM08022) 2.15.1 Creating / Adding the secure area J-Link Commander. S/N:163001730 STM32F205RCT6 Jokin

Hi "Creating secure area .... Failed with error code -262" "Removing secure area .... Failed with error code -262" J-LINK COMMANDER v6.16H PROGRAMMER FLASHER ARM V3 Sep 23 2015 What does this error code mean? Best regards. Jokin

Hi. Thanks for replying so quickly. I think I did not explain my problem well. example Project INIT STEPS ACTION RESET halt target EXIT STEPS ACTIONS READOPTCR......... This example works fine on a microcontroller is blank and option bytes ( no sector protection, no secure chip), but if you are re-programming a previously programmed microcontroller with ( any sector protected or secure chip) it fails. I tried to change the sequence in init steps and reset the OPTCR to its default value but it di…

Hello. J-Flash User Guide (UM08003) 7.6.4 STM32F4 series devices - option byte programming. example project for the STM32F405OE It's ok if the microcontroller is blank. If the microcontroller is already programmed and protected it does not work. Flash option control register (FLASH_OPTCR) nWRP: Not write protect = PROTECTED RDP: Read protect = Level 1, read protection of memories active. Init steps ???? " ExitStep0_Action = "Read 32bit" ExitStep0_Comment = "Read OPTCR" ExitStep0_Value0 = 0x40023…

forum.segger.com/index.php/Attachment/25/forum.segger.com/index.php/Attachment/24/Hello. I don´t know if this question I have to direct to IAR or SEGGER. I am using the ewarm of iar version5.30 with a j-link. When I enter to debugging the system realizes a hardware reset, but when I touch the option reset of the enviroment debugger it does not do it. I'm trying reset options (normal,core only, core and peripherals) but don´t work. In the board that I am developing there is no button of reset. Th…