Search Results
Search results 1-20 of 41.
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
Hello Nino, thanks for the quick response. The tarball works out of the box! I didn't do extensive tests, but Ozone does flashing, debugging, single stepping, etc. just fine. So I think we have a winner and I am up running, thanks for the help. Can I give you any other usefull information to investigate the issue? I thought that all ubuntu flavours are very much the same under the hood. Sadly the qApt Package Installer doesn't show which dependency causes the problem. Best regards, Martin
-
Hi All, in the past I often needed to use a Linux Laptop for Ozone/J-Link, mostly with Linux Mint. Ozone and J-Link always installed without problems. Due to other circumstances I now had to install a current Kubuntu (21.04) on a new Laptop. With this install a have problems installing Ozone. J-Link installed fine, but when I try to install Ozone from Ozone_Linux_V322e_x86_64.deb I get the following error message (also shown in the screenshot). Error: Cannot satisfy dependencies Does anyone has …
-
Ah yes, that works! Thanks a lot and best regards, Martin
-
Hi Nino, the problrm with the crash is solved meanwhile. But it is still not possible to connect to an existing session with the newest software. Can you recommend a version which is known is working? Best regards, Martin
-
Hello Nino, thanks for the confirmation. It's always good to know that the fault is not on my side Best regards, Martin
-
Hi All, as mentioned in the subject, I am experiencing problems with the latest version of RTT Viewer. When a debug session with Ozone V2.56t is open, then starting RTT Viewer V6.34b with the option "Existing Session" leads to an immediately exit of th RTT Viewer application after clicking connect. But when Ozone is not active and RTT Viewer is not using the option "Existing Session" (but "USB") then RTT Viewer does work. I think, that this is because of the update to V6.34, but i am not 100% su…
-
Hi All, i can't get the escape sequences in RTT-Viewer to work. I copied the following example from the manual into the source coe: SEGGER_RTT_WriteString(0, RTT_CTRL_RESET"Red: " \ RTT_CTRL_TEXT_BRIGHT_RED"This text is red. " \ RTT_CTRL_TEXT_BLACK"" \ RTT_CTRL_BG_BRIGHT_RED"This background is red. " \ RTT_CTRL_RESET"Normal text again." ); The text is shown in RTT-Viewer, but not in red but in standard white on black. It seems the escape sequences are just ignored. Am I anything doing wrong? Reg…
-
Hi Niklas, I found the issue. The J-LInk was connected via a "J-Link USB Isolator". After removing the isolator the update went fine. It seems, that the J-Link update process does not like the isolator. Is this a known limitation, that the isolator may not be connected during a firmware update? Best regards, Martin
-
Hello, today I installed the J-Link Software V6.16j and tried to update the firmware of the J-Link. But something does not work correctly. I attached a screenshot of the Log-window. forum.segger.com/index.php/Attachment/1815/ I have to dis-/reconnect the J-Link after updating to detect it in again. The firmware info then still shows the old version number. Anyone else experiences this problem? Regards, Martin