Search Results
Search results 1-6 of 6.
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
Hi, I'm using JLink EDU firmware V9.30 and I need to update at least to the V10. I've found this version (JLink_V11.bin) in the firmware folder op/SEGGER/JLink_V780d/Firmwares However, I'm not able to update the firmware using the SEGGER J-Link Configuration software. The output Log message is Not updated, probe/ programmer firmware is already up to date Here's the JLink EDU information Product = J-Link EDU V9.30 Nickname = SN = 269301238 USB = SN 269301238 HostFW = 2021 May 7 16:26 EmuFW = 2021…
-
Hello, How can I configure J-Flash ARM v4.28 in order to program code both to internal and external flash with J-Link ARM? I tried to configure the project settings with no success. Here's a summary when I connect the device: - First, found core ID is 0x4BA00477 and expected 0x3BA00477 (mask is 0xFFFFFFFF) - Manufacturer Flash ID is 0xAAAAAAAA and expect 0x00202257 and it is failed to connect. - Finally, If I uncheck flash ID option, board is connected but I'm not able to program. And here's som…