Search Results

No. I have not tried it. I would think it is pretty standard but often a device "memory map" needs to be defined. I just want to see if this is a simple thing or a potential show-stopper for me. I need to download and upload complete images, when needed.

Guys, Are we able to support Winbond W25Q64JV series of SPI/NOR Flash memories? Regards, Phil

Alex, Problem solved. Reset all breakpoints. There is a bug in KDS. A few people have experienced the same problem. Clearing all breakpoints resolves the problem. Thanks. Phil

Thank you, Alex. I appreciate your help with this issue. I enjoy using Segger products and will look closely at the Ozone as an alternative. Best regards, Phil

Alex, Thank you. I am just looking for a resolution. The JLink is connected to the host pc via USB and not TCP/IP. The system works fine while in the programming stage but fails during debug stage. Regards, Phil

Anything you guys can suggest would be most helpful. I really need to use this debugger the way it was designed, not just as a programming tool. Please advise.

Fabian, I am trying to program a NXP/Freescale MK64FX512VLL12, Cortex M4, using KDS (Kinetis Design Studio, V3.2.0). I have used these Jlink debuggers for years with this IDE for years. BTW, this happens with two separate Jlink debuggers. Regards, Phil

Fabian, Unfortunately, no difference. I have attached an updated log file using the new drivers. Let me know if there is anything else I can do to track down this problem. For example, should I entirely remove the drivers and reinstall? Thank you, Fabian. Phil

Fabian, Thank you for your kind reply. Attached is the log file, per your request. I am using the Jlink within the Eclipse-based NXP Kinetis Design Studio, Version: 3.2.0. I use it to program NXP/Freescale Kinetis MCUs. I am connected with a 10-pin JTAG header. The Jlink is able to program the MCU without any problems but will not enter debug mode after programming. Regards, Phil

Folks, I am unable to use the Segger Jlink V9.3 to debug my embedded C code. I am able to program my MCU but when it tries to debug the Jlink crashes and MCU does not get properly restarted. I have tried two different J-links and both fail. I have used this setup for years and have not experienced this problem before. I even tried to back out the recent code that I added but the problem persists. I have been doing updates on this particular PCB for more than 4 days without any trouble. I do not …