Search Results
Search results 1-4 of 4.
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
Alex, I agree. With no funding from ST or licensing fees it would be difficult to justify commercial side of this project. So I have already turned on my soldering iron. It should not take much time to add a connector. Thanks for quick reply. Misha
-
Hi, There is a thread related to the subject with the following statement at the end: A ST-LinkV3 conversion tool is currently not planned as according to ST all V3 boards should have an external debug header so an external J-Link can be used for debugging. I recently bought a Nucleo 32 board with STM32G431 and st-link v3 on board. Unfortunately, there is no JTAG/SWD connector on this board. I guess, I can remove R14 and R15 to get access to SWD pins of the MCU, but it would be more elegant to u…
-
Quote from SEGGER - Alex: “Just because a 10 year old probe supports JTAG as a protocol does not mean it supports all current devices that use the JTAG protocol. ” Alex, I thought that FPGA in ULTRA/PRO makes these devices "future proof". Sure, there is always a limit. And thanks for the update. Misha --
-
Quote from SEGGER - Alex: “Hi, (EDU Mini V1) => Need to check that internally. Not sure about multi-drop being supported. EDU / BASE / PLUS V11 ULTRA+ / PRO V5 J-Trace PRO Cortex / CortexM V2 Everything else is out of support and not guaranteed to work. BR Alex ” Hi Alex, According to "Software and Hardware Features Overview" on wiki.segger.com/Software_and_Hardware_Features_Overview SWD multi-drop is supported by EDU/BASE/PLUS starting with version 10 and by ULTRA/PRO starting with version 4. T…