Search Results

Hi Alex, The problem was with Windows. For some reason the quotes had been removed from around the %1, i.e. should be "%1" The %1 is detailed within my previous reply, by the way. Hope this helps anyone else with the same problem. Regards Andy

Hi Alex, Thanks for the quick reply. I followed your instructions and it still doesn't work. Maybe my problem is with Windows XP and not J-Flash? As per your instructions this is what I did: My Documents>Tools>Folder Options>File Types> .HEX>Advanced>Edit>Open>JFlashARM.exe %1 (V402a) .jflash>Advanced>Edit>Open>JFlashARM.exe %1 (V402a) Open J-Flash with a.jflash - Opens but not with a.jflash (opens with the previous one opened via the file menu) Open data.hex while J-Flash is still open - Opens …

Hi Segger support, I have registered extension .jflash to open J-FlashARM. i.e. I have associated the extension with the application. Now I would like to be able to: 1. Click on my project file 'A.jflash' and then J-FlashARM loads and A.jflash is the active project within the loaded J-FlashARM. 2. I then close J-FlashARM 3. Click on 'B.jflash' and the same happens except B.jflash is the active project. Is this possible? Regards Andy

Hi Segger Support, Would it be possible to add the LPC2365 (256K) & LPC2367 (512K) devices to the J-Flash system? We have tried using the LPC2378 for the LPC2367 with success - OK. We don't have a solution for the LPC2365 - can you advise? Regards Andy V

Hi Segger Support, I have had the following reply from NXP on my above question: forums.nxp.com/viewtopic.php?t=4707 Will it be ok to set the Segger J-Flash ‘JTAG speed after init’ to 2000KHz (2MHz) for this device? I don’t see any reason why not do you? Regards Andy