Search Results

In case it'd move things along I could probably send you an obsolete version on the PCBA so you can test it with actual hardware.

I'm getting this error message when I'm trying to erase the S5D9 chip with the ISSI chip connected to QSPI pins P500 through P505. Source Code (3 lines)With WinBond W25Q32JVSSIQ this is working OK This thread appears to have a similar problem: [SOLVED] Renesas S5D9 and QSPI IS25LP128 It's marked as "solved" although that doesn't seem to be solved at all to my mind. QSPI pins would appear to work just fine since the Winbond chip works, just like the ISSI chip does not. How to sort this out? It ap…

Quote from SEGGER - Nino: “Hello, If you could point us to an eval board we can try to get our hands on such a board and add it to tested devices as well with an example project. Best regards, Nino ” Does that target board get the job done?

The low cost TB-S5D5 has the tracedata pins on a header, even if it doesn't have them on your 1.27mm pitch header: S5D5 pinout: * P214 * TRCLK * Out * P211 * TRDATA0 * Out * P210 * TRDATA1 * Out * P209 * TRDATA2 * Out * P208 * TRDATA3 * Out P208 through P214 are available on J1 header on that board. digikey.co.uk/products/en?keywords=TB-s5d5

Hello, Yes, I remember now this issue with the streaming trace pins.. There's at least the S7 starter kit YSDKS7G2S30, but it's a bit pricey: digikey.com/product-detail/en/…30/YSDKS7G2S30-ND/5864866

Renesas synergy µCUs are not listed in the tested devices list. Would it be possible to do so? You can buy e.g. S5D9 devkit from Digi-Key: digikey.co.uk/product-detail/e…10/YSPKS5D9E10-ND/6829229

Quote from SEGGER - Nino: “Hello, Quote from ollittm: “By pin trace you mean it can do code/data streaming capture so we can do e.g. live profiles and deep back trace of instructions? ” Correct.Which capabilities are supported by J-Trace PRO can be found on our website: segger.com/products/debug-probes/j-trace/ More information about the features can be found in tab "Technology". As debug software we recommend using Ozone for the best trace experience. Ozone works compiler independent and cross-…

By pin trace you mean it can do code/data streaming capture so we can do e.g. live profiles and deep back trace of instructions? XDS560v2 Pro Trace costs $3495 so J-Trace Pro Cortex with the 1995€ price tag would be an attractive alternative if it can provide the same capabilities. Texas is also doing system trace (STM), is this something you do support?

Is the J-Trace PRO Cortex probe capable of doing streaming trace on the AM4372 or other AM437x Texas Sitara Cortex A9 processors? That processor has got ETB and also support for real time trace with the XDS560v2 Pro Trace module. They're using EMU0 through EMU11 while the Pro Cortex only has clock + 4 data bits.